DS-10 door magnetic sensor, the main part includes the sensor and the magnetic strip, which is used to detect that the door, window are in an open or closed state. When the opening & closing state of the door and window changes, it can monitor and send the data to the cloud immediately .
Mainly implemented functions
By monitoring the magnetic strip and the reed switch away or close, it is judged that the door and window are open or closed.
Upload the door and window opening & closing information to the cloud through the LoRa network
It is suitable for fire doors and other doors or windows that need to monitor the opening &closing state in real time. The door magnets are installed on the doors and windows that need to be monitored. When the opening &closing state of the doors and windows changes, the state changes can be instantly learned from the cloud.
Main Sensor:74*59*28 mm
Glue or screw
24 hours（Can be configured）
Easy installation. It is recommended to use the glass glue to glue the device to the door. The sensor (and the reed switch) and the magnetic strip are respectively mounted on two different doors. The figure below is a schematic view.
Pay attention to the distance between the magnetic strip and the reed switch during installation. When the door is closed, the distance between the magnetic strip and the reed switch should not exceed 4 cm, otherwise the device couldn’t detect the change of the door opening & closing state.