

Consumer tracker for pets, personal objects, and valuable assets. Includes a 3-axis accelerometer, GPS / Glonass GNSS receiver, single LED, and push button.
Specification
Frequencies 868 MHz / 915 MHz
TX Power +19 dBm
Antenna Gain -2.5 dBm
RX Sensitivity -138 dBm
BAT Type Rech. Li-Po, 600mAh
BAT Lifetime 7-10 days
ENV Rating Outdoor, -20 – 70 ºC
Depending on usage, the battery in your Object Locator will not need to be charged for months. When motion is sensed after a period of rest, the green LED will flash once if the device has low battery. The Tabs app will also alert you if the push button's battery is low. You can check the battery level at any time in the app by going to the Control tab on the bottom and selecting your device.

To charge your device:
Locate its battery tab (see diagram).
Lift up the tab, and connect the smaller side of the provided USB-C to A cable.
Connect the larger side to the USB port on the back of your Tabs Hub, to your computer, or to your phone’s USB wall adapter.
The green light will be solid while charging and fade on and off when charging is complete.